Designer Paint Co - Oikos Eco & Non Toxic Paints
Enviromental Choice Australia
Green Building Council Australia Member
ecospecifier
  Designer Paint Co Home   Family Health   Specifiers   Paint Products   D.I.Y. - Do It Yourself Painting   Business Opportunity   Contact Us
 
Designer Paint Co. - Non Toxic Paints A paint system that is good for you, your family, the planet and your pocket
 

Veldecor

« Back to Top Exterior Line

VELDECOR

VELDECOR by OIKOS is a semi-hiding siloxanic paint, conceived to achieve decorative glazing for exterior and interior walls. Working the product by using the brush, glove or sea sponge by OIKOS, it is possible to achieve prestigious aesthetic finishes that recreate the effect of ancient plasters. Its special characteristics make VELDECOR suitable for prestige buildings and restoration work on old town areas.

VELDECOR is applied as the decorative finish of the following products: Decorsil Roma and Firenze, Colour Finish, Archital, Neoquarz, Elastrong Paint Gum by OIKOS, assuring the whole cycle an exceptional waterproof power and a high vapour-permeability and preventing the development of moulds and algae. It is odourless, non-toxic, non-flammable and environmentally friendly.

TECHNICAL CHARACTERISTICS: THE PRODUCT

Composition: siloxanic resins in water dispersion, titanium dioxide, organic and inorganic pigments, preservatives and additives aimed at helping application and film formation.
Specific weight: 1.2 kg/l ± 3% (base P).
pH: 8 ÷ 10.
Viscosity: 3500 ± 5% CPS Brookfield (RVT 20 r.p.m. at 25ºC).
Storage temperature: +2ºC ÷ +36ºC. Keep from freezing.
Water absorption W24: 0.09 kg/m².h°0.5 DIN 52 617 (max. allowed limit 0.5 kg/m².h0.5 DIN 52 617).
Vapour permeability Sd: 0.23 m (max. allowed limit 2 m DIN 52 615).
Resistance to abrasion: in compliance to DIN 53 778, resistant to at least 5000 abrasive circles.
Colours: white + Top Exterior Line colour chart by the tinting system: DCS Décor Colour System by OIKOS.
Packaging: 0.5 - 1 - 4 - 14 Litres.

TECHNICAL CHARACTERISTICS: APPLICATION

Dilution: ready to use, max 10% with drinkable water if needed.
Yield: 15 ÷ 20 m²/l depending on the absorption of the surface.
Application tools: brush, marine sponge or glove by OIKOS.
Primer: Decorsil Roma and Firenze, Colour Finish, Archital, Neoquarz, Elastrong Paint Gum by OIKOS.
Interiors: Ultrasaten opaco, Multifund, Extrapaint or Kreos by OIKOS.
Application temperature: +5ºC ÷ +36ºC (humidity not higher than 80%).
Drying time: tack free: 1 ÷ 2 h (temperature = +20ºC with relative humidity not exceeding 75%).
Drying time: fully cured: 6 ÷ 8 hours (temperature +20ºC with humidity not exceeding 75%).
Tools cleaning: water.

Data Sheet

  
Home | Family Health | Specifiers | Products | DIY | Business Opportunity | Contact Us
Copyright © Designer Paint Co. All Rights Reserved. OE Design - Web Design Gold Coast